|
2003 R. Jeffrey, R.E. Melchers, Bacteriological influence in the development of iron sulphide species in marine immersion environments, Corros. Sci., 45 (2003) 673-714
2002 Two part paper by P. Ernst and R. C. NewmanPit growth studies in stainless steel foils. I. Introduction and pit growth kinetics 44(5): 927-941, 2002 Pit growth studies in stainless steel foils. II. Effect of temperature, chloride concentration and sulphate addition, 44(5): 943-954, 2002.. 43(3): 547-578 Mar 1999. 2001 S.B Hong, N. Eliaz, E.M. Sachs, S.M. Allen, R.M. Latanision Corrosion behaviour of advanced titanium-based alloys made by three dimensional printing for biological applications, 43(9): 1781-1791, 2001. 2000 D.G. Kolman, J.R. Scully An assessment of the crack tip potential of b-titanium alloys during hydrogen environmentally assisted crack propagation based on crack tip and passive surface electrochemical measurements, 42(11): 1863-1879, 2000. 1999 A. Leng, M. Streckel and M. Stratmann: The Delamination of Polymeric Coatings from Steel Part 1 Calibration of Kelvin Probe and basic lamination mechanisms. 41(3): 547-578 Mar 1999. 1998 L. Robbiola, JM. Blengino and C. Fiaud: Morphology and Mechanisms of Formation of Natural Patinas on Archaeological Cu-Sn Alloys. 40 (12): 2083-2111 Dec 1998. 1997 N.J. Laycock and R.C. Newman: Localised Dissolution Kinetics, Salt Films and Pitting Potentials. 39(10-11): 1771 - 1790 Oct 1997. 1996 M.A. Paez, T.M. Foong, C.T. Ni, G.E. Thompson, K. Shimizu, H. Habaziki, P. Skeldon and G.C. Wood: Barrier Type Anodic Film Formation on an Al- 3.5wt% Cu Alloy. 38(1): 59 - 72 Jan 1996. 1995 R. McIntyre, D. Davidson, I.L. Walzak, A.M. Brennenstuhl, F. Gonzalez and S. Corazza: The Corrosion of Steam Generator Surfaces under typical Secondary Coolant Conditions: Effects of pH Excursions on the Alloy Surface Composition. 37(7): 1059 - 1083 July 1995. 1994 M. Stratmann and J. Muller: The Mechanism of the Oxygen Reduction on Rust-covered Metal Substrates. 36(2): 327-359 Feb 1994. 1993 A. Leng and M. Stratmann: The Inhibition of the Atmospheric Corrosion of Iron by Vapour - Phase Inhibitors. 34(10): 1657 - 1683 Oct 1993. 1992 M. Hashimoto: 1991 J. Robertson: The Mechanism of High Temperature Aqueous Corrosion of Stainless Steels. 32(4): 443-465 April 1991. 1990 K.E. Heusler: Growth and Dissolution of Passivating Films. 31: 597-606 1990. 1989 H. Grabke and R.E. Lobnig: 1988 B. Baroux: The Kinetics of Pit Generation on Stainless Steel. 28(10): 969 - 986 Oct 1988. 1987 J. Galvele: A Stress Corrosion Cracking Mechanism based on Surface Mobility. 27(1): 1-3 Jan 1987. 1986 A. Turnbull and D.H. Ferriss: Mathematically Modelling of the Electrochemistry in Corrosion Fatigue Cracks in Structural Steel Cathodically Protected in Sea-Water. 26(8): 601-628 Aug 1986. 1985 B.D. Bastow, G.C. Wood and D.P. Whittle: The Segregation of Alloy Components in Scales and Subscales formed by Binary-Alloys of Mn, Fe, Co and Ni. 25(4): 253-285 April 1985. 1984 N.J.H. Holroyd and D. Hardie: Factors controlling crack velocity in 7000 series aluminium alloys during fatigue in an aggressive environment. 23(6): 527 June 1983 |