2025 EUROCORR
2025-09-07 09:00 - 2025-09-11 17:00 (Europe/London)
In Stravnager, Norway

Oman Corrosion and Material Innovation Summit
2025-09-15 09:00 - 2025-09-17 17:00
15-17 September 2025
Oman Convention & Exhibition Centre, Muscat
Oman Corrosion and Material Innovation Summit
Event Partner: Institute of Corrosion
Download information Leaflet

Corrosion Mechanisms in Stainless Steels
2025-09-25 10:00 - 16:00 | NMC Venue, 47 Birmingham Road, West Bromwich, West Midlands, B70 6PY, United Kingdom
Corrosion causes plant shutdowns, waste of valuable resources, loss or contamination maintenance, expensive over design and jeopardises safety. This course addresses the various corrosion mechanisms which can occur when using stainless steel materials in various industries. Real-life case studies and solutions from our vast experience in Failure Analysis will be presented. Course cost: £425 + VAT for BSSA & ICORR members,£475 + VAT for non-members
Download Information Flyer

Midlands Branch - Webinar on Case Studies in Offshore Inspection, Speaker - Neil Cowin, Worley
2025-09-25 17:00 - 18:00

London Branch Event - London Materials Society
2025-10-09 18:30 - 21:00 | Lancaster hall Hotel, 35 Craven Terrace, London W2 3EL, 35 Craven Terrace, London, W2 3EL, United Kingdom
Arrival – 18:00-18:30 Hours – Refreshments will be provided
Presentation – 18:30- 19:30
Professor Ivan Parkin
“Adventures in Materials Science From Self-cleaning Glass to Radiative Cooling Coatings”
Après presentation – 19:30-20:00 (or later)
Food and drinks
Speaker name: Professor Ivan Parkin
Presentation title: “Adventures in Materials Science From Self-cleaning Glass to Radiative Cooling Coatings”.
Abstract
This talk will give an overview of research in his group over the last 30 years. It will look at photocatalysis and the commercialisation of self-cleaning window glass. It will also look at developing new materials for various functional applications from Healthcare to batteries to carbon dioxide capture and storage and miniaturised gas sensors. Ivan will demonstrate how things can start from the lab and eventually lead to commercialisation in the materials science field.
Biography:
Professor Ivan Parkin is an inorganic materials chemist, who became Faculty Dean of Mathematical & Physical Sciences in October 2016 at University College London (UCL). Prior to his appointment as Dean, he was Head of Department for UCL Chemistry for 6 ½ years. Ivan is a fellow of the Royal Society of Chemistry, a fellow of the Institute of Mining Materials and Metallurgy and a member of Academia Europea. He is a Chartered Chemist and Chartered Scientist. His group have published 1000 publications and he has been awarded 9 medals and prizes from learned societies. He is in the world’s top 6000 citated authors for 2023 by Clarivate and has an H- index of 110.

ICorr Certified MIC Technologist Training Course
2025-10-13 08:00 - 2025-10-17 17:00
The Certified Microbiologically Influenced Corrosion (MIC) training course is available twice in 2025 by the Institute of Corrosion (ICorr) to meet the increasing demand from industry.
MIC is the least understood phenomenon of corrosion despite it was confirmed as the prime cause of a number of high-profile failures around the world with devastating effect on health, safety, reliability and finance of operations, company reputation and the environment. Around 20% of all corrosion failures are primarily due to the metabolic activities of microorganisms in industrial systems, with an estimated annual cost of UDS 2.5 billion to the oil and gas industry.
More Information

North West Branch - Committee Meeting
2025-10-14 18:00 - 21:00
In Person Event

Young ICorr Pub Quiz
2025-10-16 18:30 - 20:30

Southwest and Wales Event
2025-10-22 11:30 - 17:00
More information to follow

Fundamentals of Corrosion Course
2025-10-27 09:00 - 2025-10-31 17:00
A new Fundamentals of Corrosion course is presented by the Institute of Corrosion. The course is based on practical information and hands-on examples as well as relevant background theory. Attendees on the course are given a wide ranging introduction to all major aspects of corrosion engineering.
Successful completion of the course and the associated examination is required for obtaining Professional Membership of ICorr for those without either formal qualifications in corrosion or the relevant field experience.
27 – 31 October 2025.to be held at Corrosion House in Northampton

Aberdeen Branch AGM
2025-10-28 18:00 - 19:00
The Institute of Corrosion (ICorr) Aberdeen Branch is very pleased to announce the October 2025 monthly technical event plus AGM which will be held online on Tuesday 28th October 2025 at 18:00-19:00 (UK Time).
Please note that this will be an ONLINE event ONLY. It is FREE and open to all ICorr Members, and non-members are also welcome to attend.
In this event, DR Janardhan Saithala will give a presentation on “Corrosion Issues in the Upstream Oil & Gas Industry“.
Event Programme:
17:50 – 18:00 Webinar Login / Set-Up
18:00 – 18:15 Aberdeen Branch AGM
18:15 – 18:50 Technical Presentation
18:50 – 19:00 Q&A/Closing Out
Details for this event are contained in the attached Event Flyer.
Registration Link:
https://us06web.zoom.us/webinar/register/WN_G3-q265OQWCoyswFHwzQRw
Please feel free to forward this email and flyer to anyone who may be interested in attending this event.
ICorr Aberdeen branch looks forward to your attendance.
Download Information Leaflet

Central Scotland Event
2025-10-29 18:00 - 20:30
Feasibility of applying post-mortem analyses, Artificial Intelligence and TRIZ to evaluate Microbial corrosion (MIC/MID) – TBC
Hybrid

Institute of Corrosion AGM 2025
2025-11-04 12:30 - 17:00 | University of Manchester, School of Materials, Oxford Road, Manchester, M13 9PL, United Kingdom
We are delighted to announce that the Institute of Corrosion’s Annual General Meeting (AGM) 2025 will take place on in Manchester, hosted by the ICorr North West Branch in partnership with the prestigious Henry Royce Institute.
This year’s AGM will be preceded by a special technical presentation, offering attendees a valuable afternoon of learning, knowledge sharing, and professional engagement. It’s a fantastic opportunity for ICorr members, colleagues, and professionals in the corrosion and materials science community to come together for networking, technical insight, and strategic discussion on the future of our industry and institute.
This event is free and open to all; both ICorr members and non-members are warmly welcome to attend.
🗓 Date: Tuesday, 4th November 2025
🕐 Time: 12:30 – 17:00
📍 Venue: Henry Royce Institute, University of Manchester, Booth St East, M13 9SS
🍴 Networking Reception: Complimentary lunch and refreshments
Technical Presentation: This year’s technical presentation will reflect on the need to develop solutions that enhance materials performance in service and reduce environmental impact; Material Systems for Demanding Environments (MS4DE).
Register via Eventbrite: ICorr AGM 2025 Registration
Download Agenda – ICorr members are allowed to vote at AGM proceedings 16:00 – 17:00.

The Welding Institute (TWI) event on Managing Integrity Challenges Carbon Capture and Storage Operations
2025-11-06 09:30 - 15:30 | Bushy House, National Physical Laboratory, Hampton Road, Teddington, Middlesex, TW11 0LW, United Kingdom
ICorr is proud to support The Welding Institute (TWI) event on Managing Integrity Challenges Carbon Capture and Storage Operations to be held on November 6, 2025. Full details, including how to register are on TWI website: https://theweldinginstitute.com/event-6378690
The list of topics at the workshop includes many corrosion considerations and would surely interest our ICorr members.
List of speakers
Experts from industry will be presenting on a range of topics:
CCUS – Uncertainties with Respect to Integrity Assurance – Dr Gareth John, Executive Consultant, Intertek CAPCIS
Corrosion in CCS Networks – Operations and Design Experience – Matt Healey, Director, PACE CCS
Towards a Standardised Methodology for Corrosion Testing of Pipeline Steel in Dense Phase CO2 – Dr Shravan Kairy, Senior Scientist, National Physical Laboratory
Non-Metallic Pipes for Corrosion Resistant Transfer of Liquified CO2 – Dr Jonathan Wilkins, Technical Director, Enoflex
Industrial Advisory Group (IAG) of the Integrated Energy Industry (IEG) – Mike Lawrence, Chair, Industrial Advisory Group (IAG), Integrated Energy Industry (IEG)
Corrosion Control and Management in Carbon Capturing Plants – William Ritchie, Principal Materials & Corrosion Engineer, Kent
Advancing Integrity Management for CCUS Pipelines: Lessons Learned and Emerging Strategies – Ewa Papaj-Shields, Principal Subsea Pipeline Engineer, Genesis
CO2 Applications, Impurities, Specification, and Flexible Pipe Experience – Ian MacLeod, Technical Director, Wood PLC

Corrosion Mechanisms in Stainless Steels
2025-11-06 10:00 - 16:00 | NMC Venue, 47 Birmingham Road, West Bromwich, West Midlands, B70 6PY, United Kingdom
PLACES now available – The Institute of Corrosion (ICorr) – Corrosion Mechanisms in Stainless Steels
Join us in Aberdeen on November 6th for our next course on corrosion mechanisms in stainless steels, delivered in collaboration with ICorr, the British Stainless Steels Association (BSSA) and @R-TECH Materials.
This one-day, expert-led course is designed to provide an in-depth understanding of the fundamental corrosion mechanisms affecting stainless steels—including pitting, crevice corrosion, stress corrosion cracking, and microbiologically influenced corrosion (MIC), and more.
We’ll also cover mitigation strategies, best practices in alloy selection, and real-world case studies to bridge theory and application.
Date/Location
Thursday 6th November 10am – 4pm Village Hotel Aberdeen, Prime Four, Kingswells Aberdeen, AB15 8PJ
About The Course
Corrosion causes plant shutdowns, waste of valuable resources, loss or contamination maintenance, expensive over design and jeopardises safety.
The course addresses the various corrosion mechanisms which can occur when using stainless steel materials in various industries.
Real-life case studies and solutions from our vast experience in Failure Analysis will be presented.
The course structure will include the following:

Introduction
Overview of corrosion
Sensitisation
Tea Staining
Rouging
General/uniform corrosion
Pitting corrosion
Selective attack
Chloride stress corrosion cracking

10.High temperature corrosion
11.Polythionic Acid stress corrosion cracking
12.Microbial corrosion
13.Crevice corrosion
14.Corrosion under insulation
15.Hydrogen Induced Stress Cracking
16.Galvanic corrosion
17.Caustic stress corrosion cracking
18.Erosion Corrosion
19.Corrosion Fatigue
Each mechanism will include the following:

A description of the failure mechanism and critical factors.
How to identify the mechanism.
Locations affected within the industry.
Affected material types.
Recommendations on how to prevent the damage mechanism. including inspection and monitoring.
1 or 2 case studies related to the mechanism.

Handouts will be provided on completion of the course.
Course Cost
£425 + VAT for BSSA & ICORR members, £475 + VAT for non-members
Registration
Register today: Corrosion Mechanisms in Stainless Steels Course – The Village Hotel, Aberdeen – British Stainless Steels Association
https://bssa.org.uk/event/thurs-6th-november-the-village-hotel-aberdeen/
Recent feedback from Delegates
Previous attendees of the course have ranged from complete beginners in corrosion (zero previous knowledge) to practicing Corrosion Consultants and some of the comments received from participants are given below:

“I liked very much the layout of the course with the case studies. The lecturer was very knowledgeable”.
“AN excellent day / course”.
“Working in the energy sector, I wanted to gain valuable insights on various degradation mechanisms of SS and make use of the same in work on a daily basis. Very useful”.

Sarah Bagnall CEng, FIMMM, MICORR, Director Consultancy Services (R-Tech) – Stainless Steels Course Presenter
Other ICorr Courses
ICorr also offers many other specialist courses in Microbial Corrosion, Oil and Gas related corrosion topics, intumescent coatings, etc.
Details of all ICorr courses are available on the Institute website: www.icorr.org
See also: Training & Qualifications – Institute of Corrosion
Download Information Flyer

India Event
2025-11-11 10:30 - 23:30
The Institute of Corrosion India Branch is pleased to announce our next technical event which will be held online at 15:00 (India Standard Time) (GMT +5:30) on Tuesday 11th November 2025.
We welcome Dr Arpit Goyal, who will be presenting “Impressed Current Cathodic Protection of Steel in Reinforced Concrete”. Please see the event flyer as attached for the full information of this presentation.
This Online event is FREE and OPEN TO ALL ICorr Members and Non-Members.
To register, please use the link: https://us06web.zoom.us/webinar/register/WN_vvDLqjMCSPaFgu7brxn3Sw
Download Information Leaflet

London Branch Event
2025-11-13 18:30 - 21:00
The London Branch of the Institute of Corrosion would like to invite you to the November 2025 meeting.
The meeting will be held on the 13th of November 2025 at:
The York Room, Lancaster Hall Hotel35 Craven TerraceLondonW2 3EL
Door opens at 18:00.
This month’s talk is:
Dr Adamantini Loukodimou “Functional coatings for renewable energy applications”.
Download Information Flyer

ICORR WALES & SOUTH-WEST ENGLAND BRANCH
2025-11-20 11:30 - 15:00 | Swansea University, Fabian Way, Crymlyn Burrows, Skewen, Swansea, Swansea, SA1 8EN, United Kingdom
ICorr Wales & South-West England Branch
Room 010 Engineering North, Bay Campus, Swansea University, Fabian Way, Crymlyn Burrows, Skewen, Swansea SA1 8EN
Thursday 20th November 2025, Start Time: 11:30am (UK Time)
In-Person Presentation only.
For Registration (use LINK): Event Registration
Event is Free of Charge to attend.
Corrosion Myths and Realities: Separating Misconceptions from Evidence &
Understanding Cut-edge Corrosion of Model Coatings on Different Grades of Galvanised Steel.
Speakers: Rachael Piper, R-TECH
Thomas Michael, Swansea University
Event Programme:
11.30 – 12:00: Arrival / Networking / Refreshments
12:00 – 12:10: Introductions
12:10 – 12:40: Technical Presentation – Rachael Piper
12:40 – 13:10: Technical Presentation – Thomas Michael
13:10 – 13:20: Q&A
13:20 – 14:00: Networking / Depart
The Talks: Corrosion Myths and Realities: Separating Misconceptions from Evidence
Corrosion still remains one of the most misunderstood phenomena in industrial and infrastructure contexts, often resulting in inadequate maintenance practices, unexpected failures, and unnecessary costs. This presentation explores the widespread misconceptions surrounding corrosion, examining why they are inaccurate and highlighting the underlying principles that govern material degradation. Through a series of carefully selected case studies, the presentation demonstrates how these misconceptions can lead to misjudgements in design, material selection, and preventive strategies.
The discussion emphasises that corrosion is a complex electrochemical process influenced by multiple interacting factors, rather than a simple, predictable outcome of environmental exposure. By analysing real-world scenarios, the presentation reveals how assumptions about corrosion behaviour can diverge significantly from observed outcomes, underlining the importance of evidence-based assessment.
RAchael earned her Master’s degree in Materials Engineering from Swansea University and is now a Materials Scientist at R-TECH Materials in Port Talbot. She specialises in materials-based investigations across a diverse range of metals, alloys, composites, and plastics, providing insights that support industries from petrochemical and oil & gas to marine and automotive. Her work combines technical expertise with practical problem-solving to address complex materials challenges in real-world applications.
Understanding Cut-edge Corrosion of Model Coatings on Different Grades of Galvanized Steel.
The primary objective of this work was to identify and characterise the mechanisms and the kinetics of cut-edge corrosion of hot dipped galvanized steel (HDG) in comparison to new alloy coatings containing Zn, Al (55 wt%) and Mg (up to 2wt.%). The understanding of the cut-edge corrosion behaviour of new metallic coatings is critically important due to their ubiquitous use in steel construction products, especially those with organic coatings, in addition to aligning with the growing initiative for renewability & sustainability in the modern world. To do this we studied the cut-edge properties of various galvanized steel panels under a protective Polyvinylbutyral (PVB) coating to ascertain the fundamental mechanisms of their corrosion. Each galvanized substrate was coated with a 25 µm thick PVB coating with a 1 mm diameter through coating circular defect created down to both the galvanizing layer and bare Fe metal of each material. These samples were then cycled through controlled environments with adjusted variables of temperature, exposure time and electrolyte concentration. An example being placed in a controlled environment of 23.5oC with a relative humidity of 80% and a droplet of 5 wt.% NaCl applied over the defect area and was observed every 3 days for a total period of 30 days. We found that HDG showcased a consistent and rapid rate of corrosion throughout, with severe delamination and corrosion occurring between the exposed HDG layer and PVB interface. Conversely the Al and Al/Mg containing samples showed different behaviour as the initial rate of corrosion was many times lower than the HDG samples, with corrosion product visible only after multiple days of exposure.
Both Al containing coatings also displayed minimal delamination of the PVB later when exposed for the same length of time under similar conditions. Considering the two Al containing materials, the initial corrosion rate of the Mg containing coating was higher than that of its counterpart, however, it later displayed a rapid decrease in the corrosion rate. The addition of Al and Mg reduces the cut-edge corrosion in comparison to HDG in systems with a model organic coating providing initial insights for further coating studies with multi-layer commercial paint systems.
Thomas Michael is a Swansea University post-graduate researcher in collaboration with AkzoNobel, specialising in research regarding both corrosion mechanisms & organic coating systems for steel substrates. He graduated from Swansea University in 2023 with a degree in Material Science & Engineering and has an extensive family background in scientific fields. Outside of work he can be found modifying computers or participating in large scale group puzzle activities.
Additional Information:
Registration information will be shared with our Branch volunteers to help facilitate the
For Continuing Professional Development (CPD) or to join our Mailing List, request by email to: swchair@icorr.org
Institute Professional Memberships are available at: https://www.icorr.org/grades-and-benefits-of-individual-membership-2/
Free Student Memberships are available at: https://www.icorr.org/free-student-membership/ [icorr.org]
Download Information Leaflet

ICorr Yorkshire and Humber relaunch event and AGM - Corrosion challenges in additively manufactured metal alloys
2025-11-20 12:00 - 17:00

IOM3/MIS/ICORR JOINT EVENT - Evening Technical Presentation
2025-11-25 17:45 - 20:30 | The Palm Court Hotel, 81 Seafield Road, Aberdeen, AB15 7YX, United Kingdom
The Institute of Corrosion (ICorr) Aberdeen Branch is very pleased to announce the November 2025 monthly technical event which will be held in-person on Tuesday 25th November 2025 at 18:00 (UK Time).
Please note that this will be IN-PERSON event . It is FREE and open to all ICorr Members, and non-members are also welcome to attend.
In this event, Ian Crossland and Chris Zealand from Mocean Energy Ltd. will give a presentation on “OUR APPROACH TO WAVE ENERGY”.
Registration Link: https://forms.gle/viPGujssFi5kiytK6
Event Programme:
17:45 – 18:00 Networking & Refreshments
18:00 – 18:10 Introductions ICorr
18:10 – 18:50 Technical Presentation
18:50 – 19:00 Q&A Session
19:05 – 20:05 Closing Remarks
Event Address: Palm Court Hotel, 81 Seafield Rd, Aberdeen, AB15 7YX
Details for this event are contained in the Event Flyer
Please feel free to forward this email and flyer to anyone who may be interested in attending this event.
ICorr Aberdeen branch looks forward to your attendance.

CEFRACOR Conference ‘Durability and prevention of microbiological degradation in maritime structures’
2025-11-26 10:00 - 2025-11-28 17:00
La Rochelle26 – 28 November 2025
Following the Materials Degradation conference in Nancy in 2023 and the Cathodic Protection – Marine Sector day in Brest in 2024, the “Biodétérioration des Matériaux” and “Protection Cathodique” commissions of CEFRACOR have decided to join forces to organize a joint conference on the theme “Durability and Prevention of Microbiological Degradation in Marine Structures.” Indeed, it seems interesting to share/compare our knowledge on the impact that bacteria could have on cathodic protection and vice versa.
This conference is a place for exchanges open to all academic and industrial stakeholders concerned with issues between microorganisms, materials, and cathodic protection, including beneficial effects.
Three distinguished guests are expected at these events:
Biwen An Steppec – Senior Scientist at the Norwegian Research Center, Wednesday, November 26, 2025
Régine Basseguy – Research Director at LGC – CNRS Toulouse, Thursday, November 27, 2025
Brian Wyatt – Director, Control Corrosion LTD – UK, Thursday, November 27, 2025
For more information see website

Central Scotland Event
2025-11-26 18:00 - 20:00
Enhancing Integrity Management with Predictive Analytics: case studies on Corrosion under Insulation – TBC
Hybrid

North-East Branch Social Event - Darts Night
2025-12-02 18:00 - 20:00
Email: nechair@icorr.org
More details to follow

36th Annual Christmas Luncheon
2025-12-04 11:00 - 17:00 | Royal Overseas League, St James's, London, SW1A 1LR, United Kingdom
Event Details:
11.30 Pre Lunch Drinks
1pm 4 course lunch
Entertainment
Presentations / Raffle
Contact Steve Barke
Email: sjbarkes55@gmail.com
Download Information Leaflet

ICorr London Branch Host AMPP UK Chapter
2026-01-08 18:00 - 21:00 | Lancaster hall Hotel, 35 Craven Terrace, London W2 3EL, 35 Craven Terrace, London, W2 3EL, United Kingdom
Arrival – 18:00-18:30 Hours
Refreshments will be provided
Presentation – 18:30- 19:30
George Winning
“The Critical Role of Impurity Analysis in Ensuring the Integrity of CCUS Projects”.
Après presentation – 19:30-20:00 (or later)
Food and drinks
(After the meeting there will be opportunity to socialise at a local hostelry)
The venue: The York Room, Lancaster Hall Hotel
35 Craven Terrace
London
W2 3EL
Nearest Tube / Train Stations:
“Lancaster Gate” Station and “Paddington” Station. Both approx. 5 mins walk
Speaker name: George Winning
Presentation title: “The Critical Role of Impurity Analysis in Ensuring the Integrity of CCUS Projects”.
Abstract
The successful execution of Carbon Capture, Use and Storage (CCUS) projects hinges on the management of several technical criteria, with the integrity of equipment, materials, and critical components being paramount. Recent data indicates that 33% of all unintentional CO2 releases in existing assets were attributed to equipment or material/weld issues, primarily stemming from corrosion processes influenced by poorly understood effect of impurities in the CO2 streams.
The corrosive properties of CO2, in both gaseous and dense phases, are highly sensitive to impurities commonly found in the streams, which can adversely affect integrity and operability. The impurities in the stream, after processing, although at low levels can react to form new compounds, such as acids and secondary aqueous phases, which can impact the integrity of pipelines. These effects must be considered when setting impurity levels for a project. Even seemingly non-reactive species, like glycols and alcohols, can alter thermodynamics and phase envelopes, affecting the solubility of other impurities during phase changes.
Reaction chemistry in CCUS projects is an evolving field with limited experimental data. Testing the effects of impurities is in its early stages, with new methodologies and approaches being developed but much more is required to fully understand the effects of the impurities.
This presentation discusses the analysis of impurities and their impact on the selection, qualification, and assurance of materials to ensure the proposed asset life is achieved. Various detrimental mechanisms, including corrosion in relation to the impurity levels are discussed. Current CO2 corrosion prediction models in aqueous environments are limited in their ability to predict corrosion in pure CO2 streams, and the effect that impurities have. Recent advances in models consider the effect of the impurities, and use thermodynamic models to predict the formation of a secondary water phase, examples of this are discussed in the presentation.
Biography:
George Winning is a highly experienced Corrosion Subject Matter Expert (SME) with a distinguished career spanning over three decades in the oil and gas industry. He currently serves as an Engagement Lead in the ALO team at Wood.
His expertise covers a wide range of corrosion-related challenges. In the low-carbon sector, his work has included investigating the effects of acid on the corrosivity of dense-phase carbon dioxide and leading a working group within the Wood Joint Industry Project (JIP) focused on impurities and their reactions in CO₂ transport systems.
Over his 38-year career, George has held several key positions and has worked in most of the world’s oil-producing regions, including the Middle East, where he lived for five years in the late 1990s.
He has published numerous papers on corrosion, corrosion inhibition and, more recently, on Carbon Capture, Utilisation and Storage (CCUS). George is actively involved in professional bodies such as the Association for Materials Protection and Performance (AMPP), the Institute of Corrosion, and the European Federation of Corrosion (EFC), where he holds or has held high-profile roles.

Skills for Corrosionists Webinar - Entrepreneurship
2026-01-14 16:00 - 17:00
Online Event
Register Here: Eventbrite – Edit ICorr Skills for Corrosionists Webinar Series Launch : Entrepreneurship

London Branch February Meeting
2026-01-20 08:00 - 17:00
The London Branch of the Institute of Corrosion would like to invite you to the February 2026 meeting.
The meeting will be held on the 12th of February 2026 at:
The York Room, Lancaster Hall Hotel
35 Craven Terrace
London
SW2 3EL
Door opens at 18:00.
This month’s talk is: Nick Bander “Critical Service Isolation: Why Yesterday’s Designs Fail Today”
Full details can be found here

ICorr India Branch
2026-01-20 15:00 - 16:30
Tuesday 20th January 2026 Start Time: 3:00 PM (Indian Standard Time)(GMT +5:30) Online Presentation Only
Registration link
Event is Free of Charge to Attend, Prior Registration is Required.
Advances in the technology of corrosion inhibitor
Speaker: Prof Shweta Goyal
Professor & Head, Civil Engineering Department, Thapar Institute of Engineering and Technology, Patiala
Approximate Event Programme
15:00 – 15:10 (IST) Webinar Login / Set-Up
15:10 – 15:15 (IST) Introductions ICorr
15:15 – 16:00 (IST) Technical Presentation
16:00 – 16:10 (IST) Q&A Session
16:10 – 16:15 (IST) Closing Remarks
The Talk: Advances in the technology of corrosion inhibitor Synopsis: The talk focuses on the role of corrosion inhibitors in mitigating corrosion of reinforced concrete (RC), a primary cause of structural deterioration. Corrosion initiates when the protective passive film on reinforcing steel is destabilized due to reduced pore solution pH or increased chloride concentration, allowing aggressive ions to penetrate concrete and induce localized corrosion. Among various physical and electrochemical protection methods, corrosion inhibitors are widely adopted as a cost-effective solution to extend service life. Used in low concentrations, inhibitors reduce corrosion rates and may offer additional self-healing functionality. They are classified based on chemical composition, application method, and protection mechanism. The talk will discuss inhibitor performance in different aggressive environments, with emphasis on emerging green inhibitors exhibiting self-sensing and self-healing capabilities.
Presenter Prof Shweta Goyal
Prof. SHWETA GOYAL is currently serving as Professor and Head in the Civil Engineering Department of Thapar University. She has been actively involved in research and have handled various research projects over Rs. 700 Lakhs INR sponsored by Govt. of India agencies and industry. Her areas of research include corrosion evaluation in RC structures and development of various protection strategies; which includes corrosion inhibitors, bio-based end products and cathodic protection. She is also working on development of accelerated carbonation procedure for precast concrete and research oriented towards sustainability of concrete. She has more than 150 publications in SCI listed journals and conferences. She has delivered enormous keynote lectures in the international and national conferences. Her work has also been awarded at various platforms. She is working in close association with industries to develop and test the compound targeting better corrosion prevention. Currently, her H-index stands at 28
Additional Information: For Continuing Professional Development (CPD) or to join our Mailing List, Request by Email to: INDIAchair@icorr.org
Download Flyer

North West Branch Event
2026-01-20 18:00 - 21:00
ICorr NW Branch / AGM

Aberdeen Branch Annual Joint Event
2026-01-27 18:00 - 20:00
JOINT EVENT – ICORR ABERDEEN BRANCH EVENING TECHNICAL PRESENTATION IN-PERSON
at Palm Court Hotel
Tuesday 27th January 2026, Start Time: 18:00
This event is free to attend For Registration (use LINK below): https://forms.gle/6xYMgdpZQdgpHdnEA Integrated Non-intrusive Instrumentation for Real Time Erosion / Corrosion Monitoring and Management
Email: ABZchair@icorr.org
Download Event Flyer
