Hot Dip Galvanizing Inspector Level 2 – Classroom

Hot Dip Galvanizing Inspector Level 2- Classroom

Course Overview

Classroom course designed to assist candidates in gaining the skills and knowledge to inspect Hot Dip Galvanized steel products.

Hot-dip galvanizing is a process commonly used to provide long-term protection to steel products from corrosion. Hot-dip galvanized steel requires a thorough inspection of the finish product to ensure compliance with relevant specifications.

Approved by the Institute of Corrosion (ICorr) and produced with the assistance of the Galvanizers Association, this Level 2 course will help students to gain the knowledge to inspect hot-dip galvanized steel products and gain an industry recognised qualification.

The course assumes all candidates hold ICorr Painting or Protective Coating Inspector approval (any level), or lent, and therefore have some knowledge of inspection philosophy. Some corrosion and coating knowledge is also important due to the large amount of corrosion problems which have arisen.

 

Course content

This Level 2 course content covers:

  • Hot-dip galvanizing overview
  • Corrosion mechanisms
  • Surface preparation
  • Galvanizing chemistry
  • Inspection overview
  • Organic coating on galvanizing
  • Testing of galvanizing
  • Coating Faults
  • Handling and storage
  • Coating repair methods

Approved by the Institute of Corrosion (UK) and recognised by the Galvanizers Association

Course pre-requiste

Candidates are required to:

1

Have a knowledge of inspection philosophy, surface preparation, anti-corrosion coatings and how to use common inspection instruments.

2

Hold an ICorr Protective Coating Inspector (or equivalent) certificate and ideally hold a minimum of 12 months’ coatings related experience. Equivalent certifications include:

 

  • NACE CIP Level 1, 2 or 3
  • SSPC PCI
  • AMPP CIP Level 1, 2 or 3
  • Frosio Inspector Level 2 & 3
  • BGAS Painting Inspector Level 1 & 2

3

Seek advice if hold less than 12 months’ coating experience as they may still undertake the course and become certified once relevant experience has been obtained. Course can be taken for knowledge only without an examination.
Qualification

The course is accredited by the Institute of Corrosion (ICorr). On successful completion of the course and relevant coatings related experience, candidates will become a certified Level 2 Hot Dip Galvanizing Inspector.

The certificate is valid for 5 years and can be renewed online prior to expiry.

Interested in this course? 

Contact the Arygll Ruane team if you have any questions about this training course.

+44 114 399 5720

Protective Coatings Inspector – Level 1

Protective Coating Inspector Level 1

Course Overview

The course is suitable for candidates with or without experience in industrial painting or inspection. It will also be applicable to those who require knowledge of Protective Coating Inspection but do not wish to take an examination.

This course is designed to prepare individuals for the ICorr Protective Coating Inspector Level 1 examination. The course is suitable for candidates with or without experience in industrial painting or inspection and will also be applicable to those who require a knowledge of painting inspection but do not wish to take an examination. Most of the paint systems used in industry are addressed plus an awareness is given of other coating systems used for anti-corrosion reasons

 

Course content
  • QA, QC and inspection (basics)
  • Normative documents
  • Corrosion (iron and steel)
  • Surface preparation (ferrous)
  • Tests to detect surface contamination
  • Coating categories/types
  • Main paint constituents
  • Paint drying and curing
  • Corrosion protection methods (basics)
  • Layers of a paint film
  • Types of paint systems
  • Paint data sheets
  • Paint/paint film testing
  • Weather conditions
  • Paint application methods
  • Coating faults
  • Health and safety
  • Environmental considerations
  • Reporting
  • Standards applicable
  • Understanding written instructions

Approved by Institute of Corrosion (ICorr, UK)

Required industry experience

One year (may be inspection/application/supervision).

No previous certification required.

Special Note

It has been agreed by PDTC (ICorr) to add an experience assessment to all ICorr certifications for personnel engaged in painting and coating inspection. Full details of the changes can be provided on request.

Interested in this course? 

Contact the Arygll Ruane team if you have any questions about this training course.

+44 114 399 5720

Protective Coatings Inspector – Level 2

Protective Coating Inspector Level 2

Course Overview

Designed to prepare ICorr Level 1 Protective Coating Inspectors for the Level 2 examination. Any information in the syllabus below, which is repeated from the Level 1 syllabus, is dealt with in greater depth and in some cases involves practical usage of equipment.

Any information in the syllabus below, which is repeated from the Level 1 syllabus, is dealt with in greater depth and in some cases involves practical use of equipment, e.g. use of density cups, flow cups, contamination testing and using electromagnetic d.f.t. instruments with statistical capabilities.

Course content
  • QA, QC and inspection
  • Document control
  • Equipment control and calibration
  • Production of written instructions
  • Interpretation of normative documents
  • Corrosion
  • Control and testing of blasting abrasives
  • Contamination testing
  • Paint formulation
  • Coating systems
  • Paint manufacture
  • Paint/paint film testing
  • Hygrometers
  • Application of metal coatings
  • Coating faults
  • Paint colours – coding systems
  • Cathodic protection
  • IMO requirements
Required industry experience

Two years as an inspector.

Level 1 certification required.

Course locations

Batam, Indonesia
Our training partner, the Indonesian Institute of Non-Destructive Testing (IINDT), offers this course in Batam, Indonesia.

Contact the team at IINDT.

 Beijing, China

Our training partner, TÜV Rheinland, offers this course direct to Level 2 in China.

Contact the team at TÜV Rheinland.

 Dunfermline, Scotland

View course schedule.

 Sheffield, England
View course schedule.

 Tripoli, Libya
Our training partner, Leptis Ltd, offers this course in Tripoli, Libya.

Contact the team at Leptis Ltd. 

Special Note

It has been agreed by PDTC (ICorr) to add an experience assessment to all ICorr certifications for personnel engaged in painting and coating inspection. Full details of the changes can be provided on request.

Interested in this course? 

Contact the Arygll Ruane team if you have any questions about this training course.

+44 114 399 5720

Protective Coatings Inspector – Level 3

Protective Coating Inspector Level 3

Course Overview

Designed to prepare ICorr Level 2 Protective Coating Inspectors for the Level 3 examination. Quality assurance, specification analysis and procedure writing are the main aspects of a Level 3 training course. Corrosion and paint technology are two areas dealt with to a greater depth compared to Level 2.

This course is designed to prepare ICorr Level 2 Protective Coating Inspectors for the Level 3 examination. Quality assurance, specification analysis and procedure writing are the main aspects of a Level 3 training course. Corrosion and paint technology are two areas dealt with to a greater depth compared to Level 2.

A review of Level 2 subject matter is introduced on the first day of this course, however, if any candidates are aware that they are weak on Level 2 theory and practice, they should endeavour to revise or attend a Level 2 training course before attending a Level 3 course.

Course content
    • Quality documentation
    • Standards
    • Basic metallurgy
    • Corrosion mechanisms
    • Geomagnetically induced currents
    • Corrosion under insulation
    • Negative buoyancy coatings
    • Treatment of structural timbers
    • Tanking of concrete fabrications
    • Structural GRP composites
    • Leadership skills
    • Procedure writing
    • Report writing
    • Libel and slander

    Approved by Institute of Corrosion (ICorr, UK)

Required industry experience

Three years as a Level 2 inspector.

Level 2 certification required.

Special Note

It has been agreed by PDTC (ICorr) to add an experience assessment to all ICorr certifications for personnel engaged in painting and coating inspection. Full details of the changes can be provided on request.

Interested in this course? 

Contact the Arygll Ruane team if you have any questions about this training course.

+44 114 399 5720

Hot Dip Galvanising Inspector Level 2 – Online

Hot Dip Galvanising Inspector Level 2 – Online

Course Overview

The Hot Dip Galvanising Inspection Level 2 course equips candidates with advanced skills to inspect and assess the quality of galvanised coatings. It covers key topics such as coating application processes, common defects, and industry standards for galvanising. Participants will learn to evaluate coating thickness, adhesion, and overall compliance with international regulations. Upon completion, candidates will be qualified to conduct thorough inspections and ensure high-quality corrosion protection in galvanised structures.

Course content

Basic Corrosion
Introduction to Hot-Dip Galvanising
Hot-Dip Galvanising Process
Pre-surface Preparation and Inspection
Appearance
Painting Hot-Dip Galvanising
Standards and Guides
Quality Assurance
Quality Control
Health and Safety
Inspector Duties Maintaining Hot-Dip Galvanising Structures.

Course details

Study time
8 hours of online study, concluding with a 90-minute monitored online multiple-choice final exam. 

Certificate/Qualification
ICorr Hot Dip Galvanising Inspector Certificate of Achievement, valid for 5 years.                                             

Entry criteria
Recognised Coating Inspection Certificate and 24 months of coating Inspection experience.

Course fee

£650.00 – Course Fee
£75.00 – Online Exam Fee

Plus 20% VAT if applicable.

ICorr Hot Dip Galvanising Inspector – Certificate of Achievement. Valid 5 years.

Course dates – Open registration with access to the training material for 12 months. Final examinations can be taken on a date and time to suit you.

Enrol herehttps://corrodere.com/courses/icorr-hot-dip-galvanising-inspector/

Course and examination enquiries

For any questions or further enquiries, please visit our training partner’s website at www.corrodere.com, or alternatively, you can contact them at:

+44 (0) 1252 732236
info@corrodere.com