Standards Up-date ISO

The following documents have obtained substantial support during the past two months, and have been submitted to the ISO member bodies for voting, or formal approval.

ISO/FDIS 4624 Paints and varnishes — Pull-off test for adhesion (Revision of 2016 standard)
ISO/DIS 3549 Zinc dust pigments for paints —Specifications and test methods
ISO/DIS 14919 Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions (Revision of 2015 standard)
ISO/DTS 16774-2,3,4 Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 2: Test method for chemical resistance, Part 3: Test method for water (wash out) resistance, Part 4: Test method for adhesion on wet concrete surface (Revision of 2016 standards)
ISO/FDIS 24131-1,2 Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 1: Polyurethane lining, Part 2: epoxy lining
ISO/DIS 24489 Non-destructive testing — Acoustic emission testing — Detection of corrosion at atmospheric and low-pressure metallic storage tank floors

New International standards published in the past two months.
ISO 1518-1:2023 Paints and varnishes — Determination of scratch resistance — Part 1: Constant loading method
ISO 4212:2023 Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel
ISO 4618:2023 Paints and varnishes — Vocabulary
ISO 4905:2023 Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
ISO 7142:2023 Binders for paints and varnishes — Epoxy resins — General methods of test
ISO 7784-1,2:2023 Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen, Part 2: Method with abrasive rubber wheels and rotating test specimen
ISO/TS 19392-6:2023 Paints and varnishes — Coating systems for wind-turbine rotor blades — Part 6: Determination and evaluation of ice adhesion using centrifuge
ISO 24647:2023 Non-destructive testing — Robotic ultrasonic test systems — General requirements

Related News

The CEOCOR2024 Congress is coming closer and closer

The CEOCOR2024 Congress is coming closer and closer

The CEOCOR2024 Congress is coming closer and closer. It is an in person congress, without any possibility for remote or virtual access. All info on www.ceocor2024.com, abstracts on info@ceocor.lu. Do not forget to register and to book your hotel room as soon as...