Standards Up-date ISO

The following documents have obtained substantial support during the past two months, and have been submitted to the ISO member bodies for voting, or formal approval.

ISO/DIS 4624 Paints and varnishes — Pull-off test for adhesion (Revision of ISO 4624:2016).
ISO/DIS 4628-10 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion (Revision of 2016 standard).
ISO/FDIS 4680 Corrosion of metals and alloys —Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures.
ISO/DIS 4773 Non-destructive testing — Ultrasonic guided wave testing using the phased array technique.
ISO/DIS 5668 Corrosion of metals and alloys —Guidelines for corrosion testing in simulated environment of deep-sea water.
ISO/DIS 7539-12 Corrosion of metals and alloys — Stress corrosion testing — Part 12: Requirements for atmospheric stress corrosion cracking testing.
ISO/FDIS 7784-1 Paints and varnishes — Determination of resistance to abrasion — Part 1: Method with abrasive-paper covered wheels and rotating test specimen (Revision of 2016 standard).
ISO/FDIS 7784-2 Paints and varnishes — Determination of resistance to abrasion— Part 2: Method with abrasive rubber wheels and rotating test specimen (Revision of 2016 standard).
New International standards published in the past two months.
ISO 4215:2022 Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions.
ISO 7784-3:2022 Paints and varnishes — Determination of resistance to abrasion — Part 3: Method with abrasive-paper covered wheel and linearly reciprocating test specimen.
ISO 11127-6:2022 Preparation of steel substrates before application of paints and related products — Test methods for non-metallic blast-cleaning abrasives — Part 6: Determination of water-soluble contaminants by conductivity measurement.

Follow us on social media

General Enquiries

Institute of Corrosion
Corrosion House
5 St Peters Gardens
Marefair
Northampton
NN1 1SX

tel: + 44 (0)1604 438222
e-mail: admin@icorr.org

Related News

The CEOCOR2024 Congress is coming closer and closer

The CEOCOR2024 Congress is coming closer and closer

The CEOCOR2024 Congress is coming closer and closer. It is an in person congress, without any possibility for remote or virtual access. All info on www.ceocor2024.com, abstracts on info@ceocor.lu. Do not forget to register and to book your hotel room as soon as...

Standards Up-date ISO

The following documents have obtained substantial support during the past two months, and have been submitted to the ISO member bodies for voting, or formal approval. ISO/FDIS 4624 Paints and varnishes — Pull-off test for adhesion (Revision of 2016 standard) ISO/DIS...