Midlands Branch News

The branch held their AGM at the evening meeting on 11th April 2018, which was hosted by Amey at their International Design Centre in Birmingham.

The outgoing branch Chairman, Trevor Box, thanked the members for their continued support, those that had taken the time to prepare talks and presentations over the previous year and thanked the organisations, companies and individuals that had offered sponsorship, either by way of providing the meeting venues or refreshments at these. The committee members were elected and the new Chairman was Bill Whittaker

Following the AGM, a trinity of experts in galvanic anode technology for use in reinforced concrete gave presentations on developments in the industry, starting with Roberto Giorgini, consultant to Mapei, who had kindly travelled from Holland for the evening. Roberto’s presentation looked at design criteria and reviewed the basis of design for the use of galvanic anodes in concrete, and compared this with the more conventional design processes used for galvanic anodes in other electrolytes. It was noted that agreed design procedures for galvanic anodes in concrete are not documented and reliance on data from the manufacturers is required.

Gareth Glass, from Concrete Preservation Technologies (CPT), presented “Polarisation and Responsive Behaviour of Galvanic Anodes”. This covered the basis for galvanic and hybrid protection technology, the use of potential mapping and potential changes in the early age assessment of galvanic systems, the responsive behaviour of galvanic systems to environmental changes, the importance of responsive behaviour in aged systems and the use of corrosion rates in the assessment of protected structures. Gareth explained that a simple method of checking system installation was to measure two potentials at and away from a sample of the installed anodes, and potential mapping to show early age changes in steel potential was presented. Data were also presented that indicated the current output of aged systems may fall to low levels in dry or sheltered environments and that re-activation occurs when such systems get wet, including in systems older than 10 years. It was further shown that data can be analysed and translated into corrosion rates in the assessment of the structure. Recommendations included the production of brief commissioning reports, using potential mapping to assess performance, taking into account long term responsive behaviour especially in aged sheltered systems that may dry out, and using corrosion rates to assess the condition of the protected structure.

George Sergi of Vector Corrosion Technologies completed the evening’s talks with a presentation on a new dual-phase anode system for protection of steel reinforcement that he had been instrumental in developing with Vector. George described the process by which application of 
an impressed current charge can increase the pH around the reinforcement and passivate the steel where corrosion is taking place, and presented some data on the extent 
of charge required to do this based on laboratory experiments. The presentation explained how the Vector product could provide a charge phase without an external dc power supply.

After the presentations a lively panel discussion was held with the three experts responding to the audience questions. The Chairman thanked all presenters for the time taken in preparing and attending the very informative meeting.

London Branch News

The last presentation of the 17/18 season was a joint meeting with NACE UK, and Francois Lirola of Saipem, gave a very interesting talk entitled, “Fusion Bonded Joint: an innovative technology for cost effective plastic pipe installed in J&S lay”.

In deepwater, corrosion protection of flowlines is becoming a major issue. Conventional corrosion allowance of carbon steel flowlines, or cladding, leads to excessive procurement costs, installation weight, welding and NDT challenges. Francois introduced an interesting alternative to achieve an acceptable corrosion protection – is the use of plastic liners. However, plastic lining has been mostly limited up to now to reel lay. SAIPEM has developed and patented an innovative and cost effective field-joint system, the Fusion Bonded Joint (FBJ), which can maintain the corrosion barrier across girth weld locations along the flowline. It has minimal impact on the offshore laying rate and it is based on field proven technologies and methods that are commonly employed in gas transportation networks. The design and fabrication of the FBJ system were explained, and the results of the extensive qualification that has been carried out, were shown.

This excellent presentation led to a high level of discussion by the audience, and the chairman thanked Francois for the time taken in preparing this talk and for coming to London to deliver it.

ICorr North East News; Reschedule Event

Please join us for a presentation giving an overview of wet applied Tank Linings.

This will provide an overview of:

·      Key technologies

·       Application methods and challenges

·       Correct specification for service environment

There will also be an open forum for discussion and questions.

We look forward to seeing you there on the 1st of August from 6.00pm for snacks and great networking opportunities followed by the presentation at 6.30pm.

Please follow this LINK to register.

Michael Harrison

Graduated in Applied Chemistry (1st Class Honours) 1988 – Newcastle, UK. 15 years in Development and Testing of High Performance Linings, International Protective Coatings, UK. Development of core linings range and preparation of key support data. Established the testing for Chemical Resistance Guide. 2 Years Business Support Manager – International Marine Coatings. 10 Years Specialty Linings Technical Manager – International Protective Coatings, UK. Training of regional sales and technical personnel. 3 Years Specialty Linings

Aberdeen Branch News

The third branch event of 2018 took place on Tuesday the 27th March, with 32 attendees representing major companies including, Aberdeen Foundries, ABR Engineering, Atkins, Axiom NDT, CAN Offshore Ltd, DNV GL, ICR Integrity Ltd, Lloyds Register, Lux Assure Ltd, Maersk Oil (now TEP UK Ltd), Oceaneering, One Subsea, Plant Integrity Management Ltd, PROSERV, Shell UK Ltd, Sonomatic and Wood plc.

The event was an industrial visit to the premises of Element Materials Technology in Aberdeen, to attend a technical presentation of “Sour Service Testing of Carbon Steel Girth Welds” by Phil Dent, Element’s Global Corrosion Specialist, followed by a visit to the new H2S / Sour Service Laboratories.

Phil Dent, Element’s Global Corrosion Specialist explains SSC Phenomenon.

Phil Dent, Element’s Global Corrosion Specialist explains SSC Phenomenon.

Ian Farquharson, General Manager of Element Aberdeen and Edinburgh branches, introduced Element, and noted that is ranked as the 5th biggest materials testing and certification firm in the world following its recent merger with EXOVA. He also mentioned that Element Aberdeen is a UKAS and ISO/IEC 17025 accredited laboratory which offers one of the most comprehensive ranges of metallurgical materials testing and analysis services in the UK.
Phil Dent started his technical presentation by defining sour service conditions, followed by a description of the various types of sour service cracking mechanisms, and the environmental factors affecting the susceptibility of materials under sour service regimes. The sour service cracking mechanisms which were presented included Sulphide Stress Cracking (SSC), Hydrogen Induced Cracking (HIC), Stress Orientated Hydrogen Induced Cracking (SOHIC), and Soft-Zone Cracking (SZC). The various test methods such as the Four Points Bend test (NACE TM0316), C-Ring test (NACE TM0177, Method C), Full Ring test (BS 8701), and Uniaxial tensile test (NACE TM0177, Method A) were also explained.

The corrosion testing laboratory visit was supervised by Paul Roberts, Corrosion and Chemistry Manager, who explained that the corrosion testing services cover a full range of environmental testing simulations, including pipeline corrosion testing for sour and non-sour applications, hydrogen testing, pitting, full ring tests, as well as SCC tests.

Element Laboratories in Aberdeen also specialise in materials qualification for sour service applications and offer standard HIC, SSC tests and also more specialised Full Ring and SOHIC tests and follow international testing standards and protocols such as those from ASTM, IP MIL and NACE. Paul summarised the procedures for the H2S sour service axial tensile test, high temperature / high pressure, electrochemical tests and strain gauging.

Element Laboratory Example of Serious SCC Type Cracking.

Element Laboratory Example of Serious SCC Type Cracking.

The questions raised by attendees during the technical presentation and laboratory visits were well responded to by the hosts. This event attracted a high interest within the professionals and executives of major oil and gas operators, engineering consultancies, and service companies in Aberdeen, to visit one of the major testing and materials qualifications bodies here in United Kingdom. Overall, it proved to be an excellent event in every respect.
The April evening meeting had 78 attendees, and followed on from a very successful visit to Aberdeen by the Marine Corrosion Forum.

George Gair - Global Inspection Manager for Subsea 7 presenting to ICorr ABZ.

George Gair – Global Inspection Manager for Subsea 7 presenting to ICorr ABZ.

George Gair of Subsea 7, started the evening session with a thought provoking theme ‘Subsea Inspection – The Future’, that considered many aspects of the current cost reduction environment where there is a major focus now on how to reduce costs by incorporating new philosophies / technologies.

Very clearly the drive is to produce new and robust methods of harvesting sensor data, and subsea hardware suppliers are looking at increased in-situ equipment monitoring and intervention methods (the oceanographic community has developed remote seabed environmental monitoring systems). George highlighted many significant indicators that show a definite trend towards smarter systems, a key driver being to learn and incorporate inspection technologies from other industries such as Aerospace, Automotive, Medical and Power Generation, together with more efficient use of gathered data.

Monzar Najami - Principal Inspection Engineer of Oceaneering International.

Monzar Najami – Principal Inspection Engineer of Oceaneering International.

Monzar Najami and Hooman Takhtechian of Oceaneering International followed on with a similarly stimulating discussion on the theme of, ‘Integrity Management of Brownfield Projects: Challenges and Rewards’, highlighting the many important analysis and data gathering areas of modern RBI – Risk Based Inspection methodologies.

The presenters informed the audience that the greatest challenge to developing and implementing an asset integrity programme during Brownfield development projects, is the fact that project schedule and milestones often take primacy over integrity management processes, and in particular emerging vital integrity related interventions which can lead to conflict and disagreement. Any delay in the implementation of these activities impedes the Integrity Management Programme (IMP) and increases the level of risk to the facilities in the operating stage.

Key stages in an IMP project were highlighted as:

a) 
Identify stakeholders early in the project (project team, operations, planners, site personnel)
b) 
Define strategies and processes and add activities to the construction plan (integrated project activity approach)
c) 
Analyse historical data (collect the available list of failures, anomalies and review root cause analysis)
d) 
Material fitness for new process (review threats assessment and existing material suitability)
e) 
Baseline inspections: Get in early (define scope and input your inspection requirements in the manufacturer’s ITP)
f) 
Brownfield revamp activities: Scrutinize output (repair recommendations were challenged and resulted in major cost saving, and change in material selection)
g) 
Tagging and RBA output alignment with the existing CMMS (understand the existing Computerized Maintenance Management System prior to your RBA to avoid major re-work)
h) 
Deployment of new and advanced inspection technologies (to achieve major cost savings)
A wide range of questions followed the very comprehensive presentation and all the presenters’ slides are available on, https://sites.google.com/site/icorrabz/resource-center.

For information about all forthcoming Aberdeen branch activities, please contact, Dr Yunnan Gao, ICorrABZ@gmail.com. To sign up to the branch mailing list, go to, https://sites.google.com/site/icorrabz/home
ICorr Aberdeen will host its Annual Corrosion Awareness Event on Tuesday 14th August 2018. For further details please contact: Corrosion Awareness Chair, Steve Tate on, steve_f_tate@hotmail.com

David (Dave) Griffiths

Dave Griffiths being awarded a plaque and certificate by ICorr President, Sarah Vasey in recognition of his contributions to training.

Dave Griffiths being awarded a plaque and certificate by ICorr President, Sarah Vasey in recognition of his contributions to training.

The Institute of Mechanical Engineers training centre in Sheffield (Engineering Training Solutions) has confirmed that Dave Griffiths has retired from his consulting role in support of the ICorr courses provided by IMechE.

Dave’s role with IMechE, and previously ARL, was multi-faceted and has been a key part of the ICorr training provided first in Rotherham, and latterly in the brand new training centre in Sheffield. Dave delivered training to many of the Painting Inspector groups but also acted as Scheme Manager and provided invaluable support to ICorr’s Professional Development Training and Certification (PDTC) Committee over a considerable number of years.

Dave was recently awarded a plaque and certificate by ICorr President, Sarah Vasey, in recognition of his contribution to training, and all at ICorr take this opportunity wish him well.