The Institute of Corrosion is very pleased to welcome new company member – Midland Corrosion Services (MCS) based in Derbyshire.

Midland Corrosion Services (MCS) are Corrosion Specialists established in 2001 by Dr. Phil Munn as Director of the company. Following his retirement, Dr. Zuojia (George) Liu took over from Dr. Phil Munn in April 2021 as the Senior Manager and now promoted to Technical Director to manage daily tasks for MCS.

MCS established as one of the leading corrosion consultancy and testing companies has been providing independent testing and consultancy services to water services, building / construction and water/wastewater treatment industries in corrosion investigation and protection since 2001, with a dedicated team of professionals with over 60 years of joint experience in corrosion and materials testing, engineering, assessment and consultation and a culture of responding quickly to  clients’ requests.

Key Activities: 

• Corrosion Protection Consultation
• Customised and Standard Corrosion/Materials Compatibility Testing
• Evaluation/Testing of Corrosion/Scale Inhibitors under NSF CIAS approved (National Sanitation Foundation – Corrosion Inhibitor Approval Scheme)
• Expert Witness for Litigation Support
• Failure Investigations in Heating/Chilled/Hot/Cold Water Systems i.e. all HVAC components
• Material Selection Evaluation
• Water Analysis Services
• Weight Loss/Corrosion Rate/Coupons Assessments

 Accreditations:

• ISO 9001:2015
• NSF CIAS

​
Photo: MCS Failure Investigation

Its main area of expertise is in building services (closed heating and chilled water systems & domestic hot and cold-water systems) and water services/analysis. MCS investigate and assess corrosion in pipework, heat exchangers, boilers, pumps, valves, seals and much more. MCS also provide lab and coupon testing and failure investigation for various metallic materials such as copper (& copper alloys), brass, carbon steel, stainless steel, galvanised steel, cast iron, aluminium alloys, rubber/EPDM lining material. MCS are accredited to ISO 9001:2015 and ISO 17025.

Photo: MCS Building Services Support

The company specialises in providing customised corrosion testing for material corrosion performance evaluation and material selection, serving to date a broad mix of over 300 contractors/clients from major blue-chip construction and wastewater treatment companies to small plumbing firms and domestic properties. MCS are also part of the NSF CIAS approval scheme for testing of corrosion inhibitors used in closed heating and cooling systems and the only NSF approved test laboratory in the UK to perform the CIAS test procedure.

In May 2018, MCS became part of the Sandberg Group, which is a world-renowned material testing company which provides additional access to highly professional and independent consultants, laboratories, site survey teams and testing as well as specialised analytical equipment.

They now also collaborate with Sandberg to provide NDT [1] service for pipework inspections, weld inspection and corrosion investigation in rail, building and concrete sectors.

As from 2021, MCS have expanded the business fields to corrosion testing and consultancy of water systems of mansion-level properties, food, agriculture plants, fire sprinkler system and incinerator ductwork pipe system.

 MCS is a strong advocate of preventing corrosion damages before they occur and can offer advice on materials selection, design and root causes of failure to minimise the risk of corrosion and failures. Over the years MCS has provided advice on materials selection and corrosion protection over a diverse project range.

 For further information please contact:

Midland Corrosion Services Ltd
Stancliffe House
Whitworth Road
Darley Dale
Derbyshire
DE4 2HJ
Tel: 01629 733162

Email: info@midlandcorrosion.co.uk

Web: www.midlandcorrosion.co.uk

New Corporate Member – ICorr Welcomes Hempel: Helping shape a brighter future with sustainable coating solutions

Shaping a brighter future

Hempel is a global supplier of coatings across industries. From bridges and ships to wind turbines and homes, Hempel’s products can be found in almost every country, protecting the world’s buildings, infrastructure and other assets from corrosion. Hempel coatings are essential to their customers’ businesses. They help minimise maintenance costs, improve aesthetics, reduce waste and increase energy efficiency in the operation of assets. They extend the lifetime of the assets they protect – helping lower the asset’s environmental and carbon footprint across its entire lifecycle.

Hempel was established in Denmark in 1915 and today employs people across the globe. It’s headquartered in Kongens Lyngby, near Copenhagen, Denmark.

For the wider good

Hempel is majority-owned by The Hempel Foundation, which ensures a solid economic base for the Hempel Group and supports cultural, social, humanitarian and scientific purposes around the world.

In 2023, The Hempel Foundation donated €23 million to development initiatives in the fields of education, biodiversity and science.

Committed to sustainable development goals

Hempel are committed to the UN Sustainable Development Goals. The UN SDGs are integrated and indivisible and our Hempel goals work in a holistic way to support them. 

• We are reducing CO₂ emissions in our own operations and in our value chain and switching to renewables. 
• Our products contribute to a more sustainable and resilient infrastructure. 
• We are pursuing resource efficiency and circularity and reducing harmful substances. 
• We are committed to health and safety and the promotion of diversity and inclusion. 
• We promote ethical behaviour and good environmental practices in our supply chain. 
• We collaborate widely and pursue effective partnerships. 

Sustainability at the heart of business

Sustainability Leadership is a key pillar of Hempel’s Double Impact business strategy. For Hempel, sustainability leadership means being a frontrunner within the paints and coatings industry by enabling customers to meet their sustainability ambitions.

To achieve on these ambitions, Hempel works dedicatedly on sustainability initiatives, with a focus on reducing its environmental footprint, enhancing its social impact and maintaining its strong corporate governance standards.

Liquid engineering – R&D

Hempel strives to be the best in the business – and that means always looking for innovative ways to improve coating performance, as well as new ways for coatings to improve the world. With R&D centres across Europe, the Middle East, Asia and America, their R&D teams work with customers, research institutes, suppliers and other industries to push the boundaries of what coatings can do – always with the aim of improving customers’ business performance.

Hempel’s R&D work focuses on:

• Research into the latest paint technologies
• Developing new customer-focused products and solutions
• Partnering with customers to tailor solutions
• Reducing the environmental impact of coatings

• Increasing the sustainability value derived from the use of coatings, including extending the lifetime of assets and increasing the energy efficiency of operating assets

Driving innovation in protective coatings

As a global supplier of coatings across industries, Hempel develops advanced coatings solutions to protect assets, reduce maintenance and enhance performance. One leading example is ‘Avantguard’, a patented technology that sets new standards in corrosion protection.

https://www.hempel.com/inspiration/sustainability

For over 10 years, this innovative coating solution has extended the lifetime of steel structures across a wide range of applications, from wind towers and bridges to airports and skyscrapers. It not only prolongs the lifespan of assets but also simplifies application, reduces maintenance costs and lowers CO₂ emissions. It’s the ideal corrosion protection solution for any forward-thinking asset owner, consulting engineer, contractor or applicator.

Avantguard is the world’s first zinc-rich primer to fully utilise its zinc content by activating all three methods of corrosion protection: the barrier, the inhibitor and the galvanic effect.

With its unique properties, Avantguard ensures superior durability and reduced environmental impact in addition to its easy application; offers fast drying, fewer coats, and an excellent crack-resistant finish.

And with the recent launch of Avantguard 750 Pro, setting a new industry standard for corrosion protection and building on over a decade of Hempel’s patented Avantguard technology, Hempel reaffirms its dedication to sustainability and high-performance coating systems.

Contact

For more information, visit Hempel’s website www.hempel.com or reach out to the team at hempel@hempel.com.