Midland Branch AGM

Following a very successful half day event and AGM in 2019, the branch plans to start 2020 with a meeting at the end of Feb (date and venue to be confirmed), with Prafull Sharma from corrosion radar presenting ‘Corrosion Under Insulation online monitoring with Electro-Magnetic Guided Radar (EMGR)’. CUI is a big issue for the corrosion industry therefore any innovative monitoring system will be very beneficial in the goal to mitigate corrosion. It is therefore likely to be a well-attended meeting.

For any branch queries, please contact Bill Whittaker, bwhittaker@cathodicengineering.co.uk, or Paul Segers, paul.segers@segcorr.com

London Branch Luncheon

London Branch Luncheon

London Branch

The 2019 branch luncheon proved to be another great success, as the audience was bowled over by an enthralling guest appearance from legendary cricket commentator Henry Blofeld OBE. The unmistakable voice of the Test Match Special, regaled the crowd at the Royal Overseas League in Mayfair with stories from his 45-year career behind the mic, and his two books, which he happily signed for guests after the lunch.

Before the 170 guests settled in the Hall of India and Pakistan for the afternoon, the branch team of diligent raffle sellers had time to mingle and raise an approximate £1,650, which will help fund the future branch series of evening lectures. The contribution from Henry was greatly appreciated, as was the involvement of the event’s sponsors, which this year included Winn and Coles, DuraPol, Corrosion Integrity Management, Correx, and CTS.

The annual event also gave guests the opportunity to reflect on those that the industry lost this year, and in particular the passing of Bill Cox. Tributes to him were led by Institute President Gareth Hinds, who gave a superb account of the excellent work that Bill had done for the Institute during many years of service, which culminated in a rousing applause that Bill would have undoubtedly appreciated.

Preparation has already begun for the 2020 Luncheon, as well as a possible summer ball in London 2021, which will celebrate the 25th anniversary of the of the change of name of the Institute from the British Association of Corrosion Engineers (BACE) in 1966 to the Institute of Corrosion Science & Technology , which was the forerunner of the current Institute of Corrosion. 

The first meeting of the branch on Wednesday 8th January had 40 attendees and started with an introduction to the new branding concepts for the Institute, which will be launched in February this year, given by Marc Desmeules, who gave a fascinating insight into the process behind designing a new logo which was the start of the rebranding exercise.

The main technical meeting followed which was a panel discussion on the complexities of internal linings, the selection variables and the link to design standards. The first presentation was from Dr Nasa Miskin from DuraPol who gave a presentation on “Corrosion Prevention in Acid Gas Treating Units”, an extremely difficult and complex environment for any lining system. This was followed by a presentation from Simon Daly of Hempel on “Internal Linings; Selection Variables and Link to Design Standards” which culminated in a discussion on the requirements for the new ISO standard for the internal lining of process vessels.

Both presentations are available to view on the Institute of Corrosion website. It was a successful evening and fantastic to see both the young engineers and branch members in discussion over refreshments afterwards.

The March meeting will be the branch AGM, followed by  the chairman’s talk. Please note the date, Tuesday 10th March.

Coronavirus – Latest Advice

The Institute of Corrosion continues to follow the official UK government guidelines on how to mitigate the spread of coronavirus (COVID-19).

Our major priority is the safety and welfare of our members, officers and staff. Our main office at Corrosion House is open, with appropriate social distancing and safety measures in place for our staff and visitors.

Our training course providers will provide regular updates via their websites.

We appreciate the patience and support of our members in these challenging circumstances.

The Application of bismuth based alloys to address Oilfield challenges” by, Paul Carragher (BiSN), Lance Underwood (BiSN) and Angus MacLeod (BP)

The Application of bismuth based alloys to address Oilfield challenges” by, Paul Carragher (BiSN), Lance Underwood (BiSN) and Angus MacLeod (BP)

Aberdeen Branch

The branch held its 4th event of the 2019/2020 session at its usual venue, RGU, with a presentation on “The Application of bismuth based alloys to address Oilfield challenges” by, Paul Carragher (BiSN), Lance Underwood (BiSN) and Angus MacLeod (BP).

This was a highly successful joint presentation with IOM3 – The Institute of Materials, Metals and Mining, which has recently celebrated its 150 year anniversary. The BiSN speakers discussed in detail their Wel-Lok sealing technology which utilises a unique combination of a thermite powered chemical heater and a bismuth based alloy to deliver an efficient down hole sealing capability, using standard oilfield deployment methods.

The thermite heater provides the energy to melt the bismuth alloy in situ, allowing the heavy liquid alloy to flow by gravity to the desired location. As the bismuth alloy cools, it expands on solidification to provide a seal. Paul Carragher started BiSN in 2010 with the insight to develop new and innovative sealing solutions for the oil & gas industry, and explained the use of bismuth in downhole sealing applications

Lance Underwood, Principal Engineer at BiSN Oil Tools, who has has over 30 years of experience in the industry, then provided further insights into the development of new technologies for plugs for oil wells, covering materials selection, downhole corrosion control and long-term corrosion testing programmes. He illustrated some of the rigorous testing requirements for downhole oilfield tools including bits, mud-motors, turbo-drills, under-reamers, hammers, and laser drilling.

Angus MacLeod (Senior Intervention Engineer with BP), with 22 years Oil and Gas industry experience, then followed this up with some actual case histories from BP operations worldwide, where this technology has been applied offshore, to shut off water production in open-hole gravel pack completions, as well as the work being done to qualify the alloys, as a permanent well abandonment material. In his current role, Angus is responsible for developing new well  technology as part of BP’s Upstream Technology Group, primarily focussed on “Life of Well Surveillance” and “Plug & Abandonment”. The event generated a huge level of interest and many questions were asked, which can be found, together with the answers, on the branch website.

At the close of the meeting, the branch chairman, presented all speakers with a Certificate of Appreciation from the branch.

Full details of future branch events can be found on the diary page of this magazine and on the website, or by contacting: ICorrABZ@gmail.com.

Copies of the majority of past branch presentations can be found at: https://sites.google.com/site/icorrabz/resource-center and a photo gallery for these events is at, https://sites.google.com/site/icorrabz/event-gallery

Particular attention is drawn to the 2020 Corrosion Awareness Day to be held on Tuesday 25th  August at, Petrofac Training Centre, Forties Road, Montrose, Angus, DD10 9ET. The day will include several practical demonstrations with teaching, this year themed on fabrication and external corrosion management.  Further Details about this can be obtained from the branch Chair: Stephen Tate, email: Stephen.Tate@external.total.com

Angus MacLeod highlighted the many practical applications for this new Downhole Sealing Technology.

The Aberdeen Chair Stephen Tate, presented all speakers with Certificates of Appreciation.

New Sustaining Member – Hodge Clemco Ltd

New Sustaining Member – Hodge Clemco Ltd

Hodge Clemco Ltd

Hodge Clemco Ltd is a UK based manufacturer and supplier of blast cleaning machines, surface preparation equipment and abrasives. They have two manufacturing sites in Sheffield for both equipment and abrasives, and an extensive distribution and stockist network. Hodge Clemco’s wide manufacturing and service capability includes; portable blast machines, expendable and recyclable abrasives, plastic and Envirasponge media and equipment, blast room installations, grit recycling systems, bespoke engineered solutions, blast cabinets, PPE and spares, servicing and training.

Incorporated in 1959, Hodge Clemco have developed into a market leader in the surface finishing industry. Their products are used every day in many prestigious installations for the Ministry of Defence, Lockheed Martin, BAE, BP, Shell and Rolls Royce, to name but a few. Part of the 110-year-old Samuel Hodge Group, Hodge Clemco is part of a diverse engineering group which includes Techniquip, Victor Marine and RLBS.

New Sustaining Member – DEV4 Online Ltd

New Sustaining Member – DEV4 Online Ltd

DEV4 Online Ltd

Dev4.online have been working with Engineering companies across the globe since 2004, designing and building bespoke software applications.  They are the custodians of www.CONDI.online, which is a web application for managing corrosion on large structures, such as oil rigs, vessels and bridges.  CONDi was designed with the collaboration of many companies in the oil and gas industry who have a wealth of experience in external corrosion management, and was built by a team of software developers who have worked predominantly in the corrosion industry over the last 10 years.