Welcome to the News Section
Click down the page to the following categories: Insititute News, Industry News, Innovate Products, Ask the Expert and Fellows Corner.
Fellow’s Corner
In this month’s column, the retiring President, Dr G Hinds FREng FICorr FNACE FIMMM, discusses corrosion and the energy transition, and the need for corrosion experts to be involved. These are challenging times for everyone. Coronavirus, Brexit and climate change have...
ICorr/Marine Corrosion Forum Webinars
January 18 @ 12:00 pm - 1:00 pm Following the success of the joint ICorr/Marine Corrosion Forum Webinars in 2020 there will be a further series of Webinars 18 to 22 January 2021. The MCF will open the virtual doors once more, with attendance completely FREE to MCF...
Improved Corrosion Inhibitor to Protect Post-Tension Cables
Cortec® Corporation has released an improved version of its MCI®-309 powder-based Migrating Corrosion Inhibitor™ now formulated without silica, for the protection of ferrous and aluminium metals located in recessed areas, interior cavities, and structural voids, such...
Fast Cure, Surface Tolerant, Abrasion Resistant System for Emergency Patch Repairs
Belzona Polymerics has announced the launch of a new product, Belzona 1818, specially formulated for emergency patch repairs in highly abrasive environments typically found in industries such as mining, cement, pulp and paper, biomass, where equipment is commonly...
Follow us on social media
General Enquiries
Institute News
Middle East Expansion and Upcoming Events
Forthcoming International Activities Middle East Expansion and Upcoming Events Over the last 2 years we have been working closely with our ICorr members based in the Middle East (ME) region to develop new branch opportunities and to promote new institute membership...
ICorr Leadership Team and YEP Delegation Attends AMPP 2025 Conference in Nashville, Strengthening Global Collaboration in Corrosion Science and Engineering
A high-profile delegation from the Institute of Corrosion (ICorr) attended the AMPP (Association for Materials Protection and Performance) Annual Conference, held in Nashville from 6th to 10th April 2025. Representing the UK-based institute, the delegation included...
Welcome New Sustaining Member – Midland Corrosion Services
The Institute of Corrosion is very pleased to welcome new company member – Midland Corrosion Services (MCS) based in Derbyshire. Midland Corrosion Services (MCS) are Corrosion Specialists established in 2001 by Dr. Phil Munn as Director of the company. Following his...
Industry News
Antifouling properties of epoxy coatings
A recently published review discusses the various types of epoxy-based antifouling coatings as cost-effective and environmentally sustainable solution to biofouling. The need for nontoxic antifouling coatings has encouraged material scientists to develop a new class...
Enhanced anticorrosion performance of zinc rich epoxy coatings
In a recently published study, the effect of a partial replacement of spherical zinc particles by stainless steel flakes (SSF) on the corrosion protection performance of a zinc-rich epoxy (ZRE) coating was studied. Salt spray test, open circuit potential,...
Enhanced protection of reinforced concrete structures
The corrosion of steel bars is the main reason for the premature failure of reinforced concrete structures, and coating reinforcement is considered to be an effective method to protect steel bars from chloride attack. A recent publication, describes the development of...
Innovative Products
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Ask The Expert
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Fellows Corner
No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.