PFP Course for Inspectors – Finally, Training That Meets Industry Needs

PFP Course for Inspectors – Finally, Training That Meets Industry Needs

PFP Inspection Training Developed by Industry Experts for the Industry

In the last few weeks, we’ve published several articles about passive fire protection. These include:

In this article, we briefly review the reasons why a comprehensive, market-leading PFP course for inspectors is considered essential by the oil and gas industry. We also examine the nuts and bolts of the new Fire Protection Coatings Inspector Training Programme that has been launched by the Institute of Corrosion and PFPNet.

PFP is failing too often

Market dynamics have reduced the level of qualified inspection that helped to ensure correct application of PFP systems before plant is commissioned.

Greater competition in the coatings market has pressured margins. A consequence of this is that suppliers of epoxy intumescent and cementitious PFP coatings no longer provide on-site technical services free of charge. Combined with the drive for the oil and gas industry to reduce project costs, there has been a reduction in available competence to ensure quality installations.

Additionally, there has been a tendency to treat PFP coatings like paint, despite specialist skills and understanding required for quality PFP installation.

The result of these factors has been a decline in the quality of PFP application. In turn, this leads to failure of PFP with the associated financial and human cost impacting the industry.

The huge cost of poorly installed PFP

The cost of correcting poorly-applied PFP systems can be huge. Where installations are sited offshore or in remote locations, maintenance and repair costs can be up to 20 times more expensive than when performed in the construction yard.

Currently, 85% of coating failures occur within one to three years. Most of these failures occur because of:

  • Incorrect specification choice
  • Poor surface preparation
  • Poor application
  • Climatic conditions

Inspection of PFP systems and applications should capture the issues that lead to such failures before they happen – thus reducing rectification needs and costs.

PFP is critical for health and safety and asset integrity

Protecting an asset from fire protects the asset’s integrity, helping to achieve your paramount priority – the safety of your people.

However, many lives have been lost in offshore fires and explosions over the years – lives that may have been saved if PFP had not failed. When compared to paint, PFP coatings are much more complex.

There are many stages in the application process and specific skills and controls are needed to ensure that final installation meets the requirements for the lifetime of the asset.

PFP inspection is a critical exercise

With PFP playing such a key role in keeping people safe and the added financial risk of requiring rectification of poorly installed PFP systems, inspection of PFP is a critical exercise that can help reduce costs and save lives.

Yet, the industry itself knows there is a massive shortfall of experienced people to perform PFP inspections, especially in remote locations. Hence the need for new, improved, comprehensive training for PFP inspection. Training that will meet the standards expected by the industry, and that equips PFP coating inspectors with the expertise to identify risks of failure before they occur – thus reducing the industry’s costs, improving its safety record, and saving lives.

What expertise does the Fire Protection Coatings Inspector Training Programme deliver?

This is the most comprehensive course available anywhere in the world – developed by industry experts for the industry, in response to the industry’s needs.

Accredited by the Institute of Corrosion and PFPNet, the course has four main modules:

  • Online, which is designed as a pre-learning module to ensure all candidates understand the basics of corrosion and corrosion protection
  • 4½ days of classroom study with an industry expert
  • A predominantly written examination which will take half a day at the end of the classroom sessions
  • A Peer Review in line with all L3 qualifications

In total, course attendees will spend 10 to 20 hours training online, and around 40 hours in the classroom.

The course will be delivered through the Institute of Corrosion’s normal channels via Argyll Ruane, and additionally through the PFP manufacturers to meet the demand from global operators.

The course will be invigilated, and the exam papers collected to be marked. The tutors, invigilators and exam markers are all independent. The Peer Review will be an online meeting arranged within one month of completion of the course.

Successful candidates will be recognised as being highly professional in the inspection of PFP and accredited by the industry as the only standard specific and meaningful to the application and inspection of PFP systems.

In brief, elements covered in the training programme include:

  1. Role and Duties of a PFP Inspector
  2. Introduction to PFP
  3. Normative Documents
  4. Classification Society Type Approval
  5. Qualification of PFP Systems
  6. PFP Materials and Systems
  7. Epoxy PFP Degradation Mechanisms
  8. Fire Performance and Defective Application
  9. Pre-Job Meeting
  10. Surface Preparation
  11. Epoxy PFP Extent and Thickness Details
  12. Epoxy PFP Application Equipment
  13. Final Thickness Determination
  14. Examples of Application Defects
  15. Reporting
  16. Health and Safety

The agenda is similar for the cementitious PFP course with specifics on these types of materials replacing the epoxy specific items on the above list.

How will this course impact the oil and gas industry?

The course will provide the industry with inspectors specifically trained in the inspection of PFP. Thus, it will raise standards in pre-commissioning application of PFP coatings. The industry should benefit from a decrease in the amount of re-work on this safety-critical area of a project build, leading to significant cost savings.

The training programme has been developed by industry experts in collaboration with PFPNet – the industry body dedicated to raising standards in the specification, testing, use, application, and maintenance of Passive Fire Protection systems.

Who should take the Fire Protection Coatings Inspector Training Programme?

The course will benefit anyone who is involved in PFP, but specifically those involved in inspection. Training delegates will come from owner/operators and engineering houses, but in the main from fabricators, applicators, and inspection houses, as well as private inspectors.

In the first instance, prospective candidates for the course are likely to be those currently working on PFP installations who wish to upgrade ahead of others. Inspectors who know their trade should pass with flying colours.

The general requirement to be considered for this training will be to have at the least L1 Paint Inspector qualification and a minimum 3 years in the industry. As with all L3 courses, all potential candidates will be vetted to ensure suitability.

For more information, contact either John Dunk at PFPNet or David Mobbs at ICorr.

Or register for the launch of this exciting new training programme here.

The Institute of Corrosion (ICorr) and the Hydrocarbon Passive Fire Protection Network (PFPNet) will be launching their market leading training programme

The Institute of Corrosion (ICorr) and the Hydrocarbon Passive Fire Protection Network (PFPNet) will be launching their market leading training programme

The Institute of Corrosion (ICorr) and the Hydrocarbon Passive Fire Protection Network (PFPNet) will be launching their market leading training programme

Please find below an invitation to the launch of the new PFP Inspector training programme; “ICorr/PFPNet Fire Protection Coatings Inspector Training Programme (Ref: ICorr/PFPNet CITP)”

About this Event

The Institute of Corrosion (ICorr) and the Hydrocarbon Passive Fire Protection Network (PFPNet) will be launching their market leading training course specifically aimed at the training of Inspectors who inspect installation of hydrocarbon passive fire protection materials. The training course is targeted at both epoxy and cementitious intumescent materials and we ask you to join us for the launch of this training programme which is a step-change towards improved competence in this safety critical area of our industry.

The hydrocarbon passive fire protection training course is aimed at Inspectors responsible for the installation of product, but could equally benefit Engineers and others who wish to understand the reason why passive fire protection is important and the processes involved in it’s installation.
The launch will include commentary from a number of key notables in the industry and its your opportunity to ask the organisers detail about the course and its global delivery.

We hope you are able to join us on one of the time slots on the 23rd September but please note numbers are limited.

How to Register

This will be an online event and we would ask you to complete the Eventbrite registration:

We will then send you an invitation to the live Teams event on the time slot of your choice.
As this is a global launch and you will note that we have posted 3 events through the day in order to meet the different time zones; 09.00, 12.00 and 16.00 (UK time)

We look forward to seeing you on the 23rd September.

The Moon Is Rusting – Surely, NASA Needs a Corrosion Specialist

The Moon Is Rusting – Surely, NASA Needs a Corrosion Specialist

Outer Space – The Final Frontier for Corrosion Professionals?

As a corrosion professional, you’ll get to work in some amazing places. On the ocean. In the Antarctic. Along the Equator. Deep underground and high into the sky.

You’ll get to meet fantastic people, too. Other corrosion specialists, people in industry, perhaps a few politicians, and, of course, the colleagues with whom you work daily.

You’ll also have the opportunity to do incredible work and research. Perhaps develop new corrosion modelling, like soon-to-be President of the Institute of Corrosion, Bill Hedges.

However, corrosion professionals may soon go where no corrosion professional has gone before. The Moon!

The Moon Is rusting!

NASA scientists are baffled. They have found haematite on the Moon – a form of rust that usually requires oxygen and water.

The moon

The Moon courtesy of David Horrocks

Now, water was discovered on the Moon in 2008/9. Or, more correctly, water ice. No oxygen though. So, although we know that the Moon’s surface is peppered with iron-rich rocks, there should be no chance of any rust. The clue is in the name – iron oxide. Rust. Which is why scientists are stumped.

How can haematite form in a place where there is no oxygen and no liquid water? How is the Moon corroding?

Lead author of the research that made the haematite discovery, Shuai Li of the University of Hawaii, has said, “It’s very puzzling. The Moon is a terrible environment for haematite to form in.”

Why Is the Moon Rusting?

In the research paper, a theory for rust on the Moon is put forward. Here’s a summary:

There are trace amounts of oxygen on the Moon. In 2007, the Japanese orbiter Kaguya discovered that oxygen from Earth’s upper atmosphere could ‘hitch a ride’ on the magnetic field that trails behind the Earth. The theory is that some of this oxygen has made its way to the Moon.

This still leaves the problem of no liquid water. But wait! Even though the haematite has been found a long way from where the water ice was found, Li theorises that dust particles that bombard the Moon could release surface-borne water molecules.

These water molecules mix with iron on the Moon’s surface, and when oxygen from the Earth is present, corrosion occurs to produce haematite. Hence, the moon is rusting.

More Data Is Needed to Explain the Rusting Moon

Of course, the research only theorises why there is haematite on the Moon. For a conclusive answer, more data is needed. This data may also provide the answer to another question that is puzzling NASA’s finest: why is there also haematite on the dark side of the Moon? Oxygen from Earth (if that is where the oxygen comes from) shouldn’t reach the dark side of the Moon.

Could a corrosion specialist soon be working on the moon?

Could a corrosion specialist soon be working on the moon?

Could Artemis Provide the Answers?

Artemis was the Greek goddess of hunting, wild nature, and chastity. She was Apollo’s sister, and daughter of Zeus. Artemis is also the name of NASA’s next mission to the Moon.

NASA proposes to land the first woman and next man on the Moon by 2024. With the incredible find of rust on the Moon, should NASA include a corrosion specialist in the Moon Crew? If so, when should corrosion professionals start their astronaut training?

Outer Space – the Final Frontier for Corrosion Professionals? An amazing place to work with fantastic people, doing incredible research. (By the way, did you know that Bill Hedges’ boyhood ambition was to become an astronaut and travel to different galaxies?)

(All images courtesy of ICorr’s David Horrocks.)

PFP Course for Inspectors – Finally, Training That Meets Industry Needs

PFP Training – A Global Event

Who Will Benefit from PFP Training, and How Can You Get On Board?

In previous articles, we have discussed the financial cost of getting passive fire protection wrong and why PFP is critical for health and safety and asset integrity.

We’ve uncovered the need for improved standards in training, knowledge and expertise to prevent damaging and costly accidents occurring, especially in dynamic environments; for example, where modification to existing structures may require removal of or damage to the original PFP installation.

Simply put, well-designed, properly applied, and comprehensively inspected PFP protects people, assets and businesses. If the application process is not controlled and aligned with QA/QC standards for the coating used, you risk:

  • The final system not meeting the design’s fire specification
  • Flaws in the coating system leading to corrosion underneath the coating which is not externally visible and has consequent impact on fire performance
  • Degradation of the coating over time due to severe environmental effects

Market dynamics are directing a new approach to PFP inspection

Market dynamics are directing a new approach to PFP inspection. This approach is industry-led rather than mandated by legislation.

As margins have reduced for manufacturers of PFP coatings, the free-of-charge on-site technical service personnel provided by manufacturers are no longer extensively offered. In addition, the oil and gas industry has sought to keep project costs down, with the effect that nobody in the contract chain wants to pay for PFP specialist qualified inspection services. The result is little or no inspection from individuals who can identify and prevent problems with PFP installation.

The knock-on effects of this reduction in expertise for the oil and gas and hydrocarbon processing industries, where PFP is critical, are expensive complications further down the line:

  • The cost of substandard PFP can be experienced in the tragic loss of human lives
  • The financial cost of rectifying problems is many, many times the cost of initial application

Consequently, there has been a strong desire from companies and individuals in the industry to develop best practices, navigate regulations, and improve standards that remove confusion and conflict. This has culminated in the development of new PFP training courses designed to accredit individuals who are involved in PFP installation and inspection.

Who will benefit from PFP training?

Driven by industry needs and defined by industry experience, the new and unique Institute of Corrosion/PFPNet Fire Protection Coatings Inspector Training Programme will qualify inspectors of epoxy intumescent and cementitious PFP coatings used to protect against hydrocarbon fires. The course is designed to provide evidence of distinctive competence to properly understand and inspect PFP installation in new construction or retrofit situations.

In brief, there are three categories of operator who will benefit from this training:

  • The owner operator/engineering house who will need to build the course into specification, to ensure that PFP is fully considered and that the design and application of PFP meets improving standards and industry best practices
  • The fabricator/applicator who will need to have their inspectors competently trained, demonstrating that they are committed to maintaining improved standards of application and inspection
  • The inspection houses who will need to have trained inspectors ready to meet the market requirement

Gain PFP expertise through blended learning

Blended (sometimes called ‘hybrid’) learning combines online training with traditional ‘classroom’ training to maximise effectiveness. The decision to present this PFP course in this manner was easy to make. It also means that COVID-19 risks are minimised, as you’ll be doing around 10 to 20 hours of study online.

The online part of the course will prepare you for the classroom learning. In the classroom, you’ll benefit from working in a group, gaining different perspectives, and improving the effectiveness of learning. The classroom sessions are delivered over four and a half days.

When you have completed the classroom sessions there will be a half-day exam, with peer review completed within 28 days.

Who is delivering the training?

Training of this status deserves to be delivered by the best of training establishments. The Institute of Corrosion is pleased to have been selected as a partner, and training will be delivered via Argyll Ruane.

In addition, you will also be able to access this training via the PFP manufacturers. In alphabetical order, these are:

  • Carboline
  • International Paint
  • Jotun
  • PPG
  • Sherwin-Williams

The official launch of this exciting new training is set to take place on 23rd September, via a Teams meeting to be delivered in the East and then delivered in the West later the same. At this launch, you’ll also be introduced to some of our expert course presenters for this PFP training.

To register for the launch, or to discuss which of the three training mechanisms will be best for you, contact either John Dunk at PFPNet or David Mobbs at ICorr.

Innovative Products – New Combustible Gas Detector

Innovative Products – New Combustible Gas Detector

Blackline Safety Corp. a leader of gas detection and connected safety solutions, has announced a partnership with NevadaNano, a developer and manufacturer of microelectromechanical systems (MEMS)-based gas sensors, to add their MPS™ Flammable Gas Sensor technology to its line-up of cloud-connected G7 wearable detection systems.

According to the company, where traditional LEL sensors fall short, the MPS Flammable Gas Sensor detects gas mixtures as accurately as it does a single gas, eliminating false alarms with built-in environmental compensation, poison immunity, fail-safe design, and a real-time conversion factor. Now a member of Blackline’s G7 gas sensor portfolio, the MPS sensor delivers the industry’s most linear response for the LEL of individual and mixed gas compositions for the 12 most common combustible gases, including hydrogen, methane, ethane, propane, ethylene, xylene. Across this wide range of gases, the MPS sensor maintains accuracy for over five years and incorporates internal diagnostics to automatically detect issues with the sensor itself.